hotmtlnovel Chapter 123 Master, you are too dark-hearted. I also want to pamper my junior brother.
Chapter 123 Master, you are too dark-hearted. I also want to pamper my junior brother.
"it is good!"
Lin Xueming was just about to go over to help when he saw sparks flying from the lathe and a sharp sound coming out.
Lin Xueming stopped. He could tell from the sound and sparks that there was no problem with his junior brother's processing this time.
Master Xu standing by was dumbfounded. "Is it really fixed?"
Lin Xueming looked at Zheng Guo's skillful movements, and his heart was filled with even more wild waves. Could this be the main reason why the master doted on his junior fellow apprentice?
Lin Xueming sighed and said, "Master, it seems to be like this.
Master, can you tell me if I am dazzled or dreaming? "
Master Xu also noticed Zheng Guo's technique. If Zheng Guo was cautious at the beginning and made adjustments in his movements.
But now, he clearly saw a fitter with decades of experience processing the accessories.
I won’t say how much stronger he is than me. Well, it seems that he is just a little stronger than me. His technique is even better than that of my second apprentice Lin Xueming.
But how is this possible?
This is talent, it’s fucking scary, finally Master Xu sighed: “Hahaha…you ask me, who should I ask?
I also want to know what happened?”
"Master, who else should I ask if I don't ask you? You are my master!"
"Get out! Get as far away as you can!"
After a while, Zheng Guo finished processing the rod-holding material in his hand.
Lin Xueming immediately stepped forward to take the pole and picked up the tools to measure.
"Huh"
Lin Xueming took a deep breath.
You should know that materials processed by lathes will have a certain error value, usually between a few microns to more than ten microns.
But what he saw was that this way of holding the club was not a bit more or less. It could be said that this way of holding the club was the most standard and perfect.
"Second Brother, I am doing an okay job, right?"
Zheng Guo asked Lin Xueming a question when he saw that he was in a daze. Master Xu was also listening attentively.
"Okay, very perfect, absolutely perfect! This is simply a work of art!"
Master Xu felt like there was something wrong with his ears. When did his second apprentice become so sweet-mouthed and praise people so well?
"Give it to me, let me test it!"
Master Xu took the rod and was dumbfounded when he started measuring. He continued measuring and was still dumbfounded, until his whole body became numb.
As the best fitter in the workshop and even in the factory, he must have processed perfect materials.
But what about Zheng Guo? This was the first time this brat had processed materials using a lathe. Okay, although the previous few were scrapped, this brat said it was a problem with the lathe.
In fact, he knew this best. This lathe was not new when it was purchased, and it has been used for many years. Even he was reluctant to touch it.
After thinking it through, Master Xu still felt like he was dreaming.
"Master, what's going on? Why do you have the same expression as Second Brother?"
Even though Zheng Guo already had master-level benchwork skills and was in good working condition, this was his first rod holder.
There will definitely be no problem if it is acceptable, but as for the extent of the error, he has no idea and will only know after measuring it.
Master Xu came back to his senses and gave Zheng Guo a blank look.
“It’s just so-so, just passable.
But don't be proud, you have to keep working hard, understand!"
When Zheng Guo heard that he passed, he immediately grinned, "Well, Master, you know me.
I am a very down-to-earth person, I will continue to work now!"
Lin Xueming listened to the conversation between his master and his junior apprentice. Damn, how could he not dote on a disciple like him?
"Junior brother, wait, let me try the lathe first."
"Okay, Second Brother!"
Zheng Guo made way, Lin Xueming picked up a piece of material, tightened it, and began to gently push the lever.
"this!"
Lin Xueming was dumbfounded again. The movement was so smooth that the slight up and down and left and right shaking that had occurred before was gone.
Lin Xueming continued to push the lever, and the material came into contact with the peeling knife. In the past, he would have had to control the force at this time, but now he didn't need to do that at all.
In a trance, Lin Xueming came to a terrible conclusion that this lathe was the most convenient lathe he had ever used, without a doubt.
After a while, Lin Xueming also finished processing the holding rod and couldn't wait to pick up the tools to measure.
The error of several indicators is only one millimeter.
This is already a top-quality workpiece, and I should be happy about it. However, when I think of the one processed by my junior fellow apprentice, I realize that it cannot be compared.
This is the difference between defective and perfect.
Seeing that Lin Xueming was sluggish again, Zheng Guo said, "Brother, are you still going to work? If you don't want to work anymore, let me try again. I will make sure I can do a good job and produce a rod without any errors!"
"puff"
Lin Xueming felt like vomiting blood.
At this moment, he also had a feeling, that is, the gap between genius and mortal.
Suddenly Lin Xueming thought of his senior brother, who was also very capable and talented, and many of his skills were taught by his senior brother.
Comparing Zheng Guo with the eldest brother, well, the eldest brother has also become a mortal.
"Junior brother, you are already very impressive..."
"Xue Ming, don't praise this brat, he can't stand praise.
Well, you continue to work. Come on, Xueming, let's go have some tea."
Lin Xueming looked up at his master again. Well, the master is the master and he had no choice but to accept it. Especially since the master was so shameless. This was the first time he had seen that in all these years.
Lin Xueming smiled bitterly and nodded. Just as he was about to leave, he suddenly stopped.
"Junior brother, do you really know how to adjust and repair a lathe?
Oops, that’s not what I meant…”
Yes, Lin Xueming regretted it as soon as he asked the question. Isn’t this obvious?
"Second Brother, I can do it. Didn't you see it all?"
"Junior Brother, let me ask you for help. Please check the lathe for me. If it can be adjusted or repaired, please fix it for me today."
After he finished speaking, Lin Xueming felt that he had said something wrong again. There were a total of more than ten lathes. Asking the junior brother to fix them in one day would be too much of a hassle, so Lin Xueming quickly changed his words: "Junior brother, you only need to help me fix one more lathe today.
You can handle the rest as you see fit. If two days are not enough, then three days. If three days are not enough, then five days. Five days..."
"Ahem... Ahem! Xiao Zheng, I'll give you three days to fix the lathe!"
Master Xu couldn't stand it anymore. His second apprentice was still too stupid to talk.
But Lin Xueming felt that his master was too cruel. He was just ordering a long-term worker around. A genius like his junior fellow apprentice must be pampered.
How come the master can pamper him but the senior brother is not allowed to pamper him?
"Master, aren't you making things difficult for me?
As long as my junior brother helps me fix the lathe, I will give him all the work for this month!"
Master Xu immediately rolled his eyes at his second apprentice and said, "Okay, whatever you want! It's up to you two!"
After he finished speaking, he left angrily, but after he had taken a few steps, he saw Master Xu's old face smiling like a flower.
"Little Junior Brother, let's get started!"
"Oh, okay, let me take a look at the lathe first..."